BioGuard® Mineral Springs

BioGuard®. Guarding more than your pool.

Start with Mineral Springs® Beginnings®, contains everything you need for properly balanced, soft, silky pool water

Use Mineral Springs® Renewal® Weekly for continued great pool care

MS-10 Unit equivalent to Goldline Controls AquaRite Unit - use as a replacement.

MS-20 Unit equivalent to Goldline Controls AquaTrol Unit - use as a replacement.

User's Manual & Guide (for units manufactured prior to October 2008):

MS-10 / AquaRite®

MS-20 / AquaTrol®

BioGuard® Mineral Springs® MS-10 / Goldline® AquaRite® System Unit - use with pools over 12,000 gallons & up to 40,000 gallons

Now in 3 convenient configurations to match your pool needs best.

BioGuard Mineral Springs / Goldline components can be used in ANY SALT generated pool. This is where it all begins.

Now you can easily clean your Turbo Cell with new Mineral Springs Cell Cleaner.

MS-10 / AquaRite® unit for residential inground pools up to 40,000 gallons of water (commercial pools up to 25,000 gallons).

MS-10 / AquaRite® System Unit Includes: control box (as shown in picture), Turbo Cell with built-in flow meter & diagnostics.  Hardwire for 110/220 v. See your local electrician for installing this part of the system.
Our web Price $1849.99

40K Gallon System  $1499.99	Quantity:
T-Cell-15 Replacement Cell ONLY $799.99	Quantity:
25K Gallon System $1199.99	Quantity:
T-Cell-9 Replacement Cell ONLY $699.99	Quantity:
15K Gallon System $999.99	Quantity:
T-Cell-3 Replacement Cell ONLY $499.99	Quantity:

Ships nationwide

MS-20 / AquaTrol® unit for ANY pool (inground or aboveground) up to 18,000 gallons of water.  The same as the MS-10 unit but with built-in timer (not shown)

MS-20 / AquaTrol® System Unit Includes: control box with built-in timer (not shown), Turbo Cell with built-in flow meter & diagnostics. Wired for 110v only.  Twist Lock plug in cord included (conforms to most electrical codes, please check your local codes first) for self installation.
Our web Price $1069.99

Ships nationwide

When initially adding Mineral Springs® Beginnings® in a fresh start or new pool, add the total amount over a 2 or 3 day period for best results.  Initial dosage is 1 bag of Beginnings per 1,000 gallons of pool water.  Check your pool's dimensions & gallonage here.

Caution: Freshly plastered pools MUST WAIT approximately 28 days to allow the plaster to properly cure BEFORE ADDING BEGINNINGS in order to prevent possible staining or mottling. 
 

Note - Pools using salt only will require: Stabilizer or cyanuric acid, Pool Magnet, Scale Inhibitor, and Optimizer Plus for optimal performance & protection of pool surfaces & equipment.  Make it easier with Mineral Springs Convert and Mineral Springs Stain & Scale.

NOTE:  Avoid physical contact with product.  Follow all safety information on label instructions.  Open ONLY in WELL VENTILATED AREAS.  Avoid breathing fumes.  Store in a cool, dry place.  Keep out of the reach of children.
 

											ABOUT TRUST ONLINE
Returns		Shipping		Privacy & Policies		Recycling		Contact Us		Site Map
Copyright ©, Par Inc. of Conn., Par Pool & Spa, 2000 - 2012. All international rights reserved.