BioGuard® Mineral Springs® System (Mineral Springs® Beginnings® & Renewal®) is 100% compatible with all brands of electrolytic saline generators.

BioGuard® Mineral Springs® System has many significant advantages over using other stand alone electrolytic saline devices, such as:  Less pH fluctuation (contains built-in buffers)

•  Less scale build-up on filter, heater & electrolytic cell (contains built-in chelants)

•  Built-in filter enhancers and clarifiers

•  Softer water

• Virtually eliminates staining due to iron present in "cheap" salt

Follow these simple steps to begin your Mineral Springs® experience:

1. Balance the pool water based on the following ranges:

   Total Alkalinity: 100 -120 ppm;  Ideal 100ppm

   Calcium Hardness: 200-400 ppm **

   pH: 7.4-7.6

2. Since a mineral or salt level has already been established in the pool, it is not necessary to add Beginnings® . However, to achieve some of the same benefits that Beginnings® offers, add BioGuard® Optimizer Plus® according to label directions to obtain a 50 ppm residual.

3. Add 1 quart of BioGuard® Scale Inhibitor per 10,000 gallons of pool water to prevent scaling.  If your Calcium hardness is over 400 ppm, a double dosage may be necessary.

4. If heavy metals such as Iron, Copper or Manganese are present in the water, treat with 1 quart BioGuard® Pool Magnet per 10,000 gallons. 

5. Add 1.5 lb. BioGuard® Stabilizer 100 per 5,000 gallons of water to prevent sanitizer degradation from UV light.  Also known as Cyanuric acid, conditioner or chlorine stabilizer.  CYA level should be about 40 ppm.  

6. Begin the maintenance program by adding Mineral Springs® Renewal™ on a weekly basis: 1 lb. per 5,000 gallons or 1 bag (4 lb) per 20,000 gallons.

That's it!  Once you're going, it's...

• One product (Renewal®)

• Once a week

• No Algae (none that our customers have reported yet in 5 years!)

• No Cloudy water (ditto)

• NO KIDDING!

How Mineral Springs® works & installation

Mineral Springs® Products