Pool Care Total Alkalinity Increaser
An economical way to raise & adjust the Total Alkalinity in
the water of your inground or
aboveground swimming pool.
Proper Total Alkalinity (TA) levels are almost more
important than your pH. Almost. If the pH of your pool is difficult to maintain
- sometimes called "pH bounce" - then the TA in your pool water is LOW.
Low TA will lead to the same problems as low pH: higher chlorine consumption,
equipment & surface corrosion.
Learn more about
good water balance here.
Higher TA will lead to cloudy water, early algae growth,
along with not being able to lower the pH.
Pool Care Total Alkalinity Increaser is
great for raising Total Alkalinity. TA in vinyl liner pools should be in a range of 100 -
ppm. In concrete or plaster pools, the TA should be about
80 - 120 ppm.
Easy application. Just broadcast into the water.
Be sure to follow all label instructions for best results.
Completely soluble. No residue.
1˝ pounds of Total Alkalinity
Increaser will raise the total
alkalinity of 10,000 gallons of water about 10 ppm. Total alkalinity should be
maintained in the range of 50 to 110 ppm unless the hardness of the pool water
is above 200 ppm, in which case, total alkalinity should be in the range 50 to
Use with ALL Chlorine, Salt/chlorine, bromine, Ionizers
(Nature2 or Pool Frog) or biguanide (Soft Swim or Baquacil) pool care systems.
Website ONLY. We ship to all of the
lower 48 US states.
|5 lb. $14.99
|25 lb. $44.99