Aqua Finesse™ - Gentle & easy spa & hot tub water care you've been waiting for.

The proven European system of treating spas & hot tubs.

Dermatologist tested. Tested & approved by KEMA Institute

Don't forget the AquaFinesse Filter Cleaning Tabs!

Easy to maintain.  Minimal water balance issues.

Completely compatible with ionizing or ozone systems.  Great alternative to regular chlorine or bromine systems.

Exclusive Aqua Finesse™ technology works to eliminate biofilm & scale build-up in your spa's or hot tub's plumbing lines, filter & heater.

Learn more about biofilms. Briefly, there are 3 main things to realize when dealing with biofilms:

1. Biofilms contain up to 99% of the bacteria in the average spa or hot tub
2. Biofilms will actually absorb any sanitizer (including chlorine & bromine) rending it almost useless
3. Biofilms form the "base" for many kinds of scaling due to the very low pH of the biofilm

Using AquaFinesse provides you with 5 outstanding benefits compared to other spa care systems:

1. Continually removes biofilms & scaling
2. Utilizes a very low level of effective chlorine
3. Provides silky feeling water
4. Water is easier & better balanced
5. Longer intervals between drains & refills

Adds a very mild lavender scent.  No chemical odor. 

Compatible with non-oil, crystal or granular (not compatible with certain liquid fragrances) spa & bath fragrances such as SpaZazz Crystals or Magma Onsen.

Available with sanitizing tablets or granules.

The Large AquaFinesse™ Spa kit treats 400 - 500 gallons for about 3 months. 2 - 2 ltr. Bottles AquaFinesse, chlorine, measuring cup.

Deluxe AquaFinesse™ Spa Starter Kit treats 400 - 500 gallons for about 3 months. 2 - 2 ltr. Bottles AquaFinesse, Granular chlorine, measuring cup, 1 AquaFinesse SpaClean Puck. Perfect for initial start up of a new spa or conversion to AquaFinesse.

Which kit to use? Our personal recommendation is the Granular Kit.

Tablet kits should NOT be used with the following spas: Dimension One, Hot Springs (includes Tiger River, Caldera, Hot Spot), Sundance and Jacuzzi brand.

1. Two days before changing the water in the spa, add 1 AquaFinesse SpaClean Puck into the spa (floater, filter area, skimmer, etc).  The water will become VERY cloudy as the SpaClean Puck removes the biofilm build-up throughout the spa & its plumbing system.
    
2. Thoroughly rinse & clean the filter cartridge. AquaFinesse Filter Cleaning Tablets will effectively clean filter cartridge of removed bio-film and other waste. If the filter cartridge is older than 1 year, consider starting with a new one.
    
3. Drain hot tub completely. Run garden hose for 60 seconds before filling the tub with fresh tap water. (This is to help flush out any biofilm in the garden hose.) Using a tap-water pre-filter dramatically removes unwanted heavy metals metals and other impurities getting you off to a cleaner start.
    
4. Shake the bottle of AquaFinesse™ to mix the solution. Pour the correct amount of AquaFinesse™ (as indicated on the bottle) into the water. Use the enclosed measuring cup. Do NOT overdose. Spa owners who live in High Water Hardness or High Calcium Hardness areas need to follow these special instructions.
    
5. Turn on jets for a minimum of 2 minutes to activate the AquaFinesse™ water care system.
    
6. Place (1) sanitizing tablet in the slow-release dispenser, close cap, fill with water and place on top of filter (or in basket). If you do not use the dispenser, the tablet will dissolve much faster & put "too much" chlorine into the spa.
   
   OR use 1 tablespoon SpaBoss Chlor Aid DiChlor granular chlorine per 400 gallons. Chlorine granules should be used as needed (maintaining a FAC - free available chlorine - level of about 1.0 ppm).
   
   Check dispenser every week to make sure tablets are still intact. For tubs with functioning ozone or silver ion systems, the use of sanitizing tablets may not be required. The Swimming Pool & Spa industry as well as health professionals recommend maintaining a Free Chlorine level of about 1.0 ppm) to maintain a sanitary environment.
    
7. Repeat steps 2 and 4 on the same day every week.
    
8. Clean the filter once a week to ensure total sanitation.
    
9. Thoroughly clean your filter cartridge with AquaFinesse Filter Cleaner once each month.
    
10. Ensure your ozone system is working properly. Perform regular maintenance of your ozone system and consult your dealer if you think it needs repair.
     
11. Adjust pH & Total Alkalinity as needed (pH 7.4 - 7.6, TA 100 - 120 ppm). As long as the fill water Calcium Hardness (CH) is over 70 ppm, there is no need to adjust the CH.  AquaFinesse™ will buffer the water hardness.

Click here for the Aqua Finesse Usage Facts.