SpaBoss® Spa & Hot tub Chemicals
Chlorine, Bromine Granules & Tablets, Shock Treatments 

SpaBoss Brom Aid is a liquid bromide salt solution that provides a bromine "bank" in spa & hot tub water.  Once bromine is put in the water, it stays there until the spa is drained.  Just top up about every 2 weeks.

SpaBoss Energize activates the bromide salts & shocks the spa water.  Is an excellent non-chlorine shock treatment as well.

For more information about spa water care & start up, click here.

Dosage/Application:
Read & follow all label instructions.  Adjust pH to 7.2 - 7.6. Add 10 oz. SpaBoss Brom Aid per 500 gallons of water with pump running broadcasting over the water's surface on initial spa start up only (drain & refill). Add about 1 oz every other week to top off.

SpaBoss Energize is added at a rate of 4 oz (2 capfuls) per 500 gallons AFTER using the spa.

Hint: NEVER test your spa or hot tub water after the high speed jets or air bubbles have run.  Bubbles from high speed jets release carbon dioxide into the water causing a false HIGH pH.  ALWAYS wait 2 to 3 hours after use or the jets have been turned off for accurate water balancing levels.

Sizes Available:

Click on the Duck
for Spa, Bath, Aromatherapy & Other
Gift ideas