SpaBoss® Spa & Hot tub Chemicals
Spa & Hot Tub Water Balancing Products

For more information about spa water balance, click here.

CAN BE USED WITH ANY HOT WATER TREATMENT SYSTEM.

Dosage/Application:
Read & follow all label instructions.  Adjust pH to 7.2--7.6; Total alkalinity in spas should be 120 - 140 ppm in MOST spa care systems (Pristine Blue systems should maintain a TA of no higher than 80 ppm). Add 1/2 CAPFUL per 500 gallons of water with pump running broadcasting over the water's surface. Retest spa water after about 3 hours.  Do not pre-dissolve.

Hint: NEVER test your spa or hot tub water after the high speed jets or air bubbles have run.  Bubbles from high speed jets release carbon dioxide into the water causing a false HIGH pH.  ALWAYS wait 2 to 3 hours after use or the jets have been turned off for accurate water balancing levels.

Sizes Available: 1.5 lb. Bottle (up to up to 50% more of  the amount normally found in other brands of pH increasers or alkaline products) - $6.99 each

Click on the Duck
for Spa, Bath, Aromatherapy & Other
Gift ideas